Why increase the lifetime of the filter

I want to increase the service life of the filter? In fact, in all the normal work, the application cost of the filter is not very high, and it is not even enough to produce a few hours of production of some companies, but if the filter is often If there is a problem, it is necessary to terminate the manufacturing and carry out maintenance or disassembly of the machinery and equipment.

The risk and cost of the filter are higher than many, and the various damages caused by the shutdown at this time are only borne by the company itself, and these damages are undoubtedly more expensive than the accessories of the machinery and equipment. Very high. Therefore, if the company can effectively measure these assets, it will be found that it is more cost-effective to do a good job of filter maintenance and increase the life of the filter than to wait for you to change the filter after the filter is destroyed.

How to increase the service life of the filter? A better way is to raise the pre-filter device, and immediately block some dust or air pollutants with larger particles in the pre-filter device, and disassemble or clean the pre-filter device. There is no need to shut down and adjust. In addition, it can reduce the compressive strength of the filter during operation, and improve the application resistance and service life of the filter to a certain level.

Secondly, we must pay attention to the manipulation of the filter to the compressive strength of the filter. If the compressive strength of the filter is too high, it is very easy to cause the filter to overload. At this time, it will definitely endanger the life of the filter. . Naturally, due to the manipulation of the compressive strength in the work, it is also very important to immediately clean the filter. Whether it is the cleaning of the cabinet or the immediate removal of the filter, all should be noticed.

When applying the filter, we must think about ways to increase the service life of the filter, so that it can reduce the cost of operating costs to a certain level, increase the profitable indoor space, and also improve the reliability of the manufacturing work.